Designed to Provide Operators with the Ultimate Versatility

KUHN Multi-Master plows are designed to provide operators with the ultimate versatility. With a wide variety of options, easy adjustability from the cab and high quality features that last a lifetime, these plows will be sure to adapt to a wide variety of terrains.

CONTACT US FOR PRICING
Download the Literature

The Multi-Master 153 and 183 plows have been designed to meet the requirements of many operations to provide a machine that is easy to use and strong enough to meet the demands of today’s mid-size to large operations to achieve maximum productivity. This plow range is available from 3 to 7 bottoms in either traction-bolt or non-stop hydraulic. The strength, simplicity and different options available make these plows fully adaptable to your conditions.

YOUR BENEFITS

A Variety of Options to Meet Your Operation’s Needs

Multiple-Molboard-Options (1)

Multiple Moldboard Options

  1. H4 Moldboard: The H4, helicoidal, Scandinavian-type moldboard provides well-formed plowing to a normal depth range of 7-12”. The share is fitted with a reversible/replaceable point that greatly increases the life of the share. Recommended for fall plowing, the H4 moldboard is especially suited for heavy and damp clays. Furrow passes are well defined and trash burial is excellent.
  2. N Moldboard: The helico-cylindrical N moldboard plows to a depth of 14”. Designed to be highly versatile, it is cylindrical at front, helicoidal at rear. A low draft ensures a partly broken furrow with excellent trash burial. Recommended for spring plowing, this moldboard is versatile and works well in sandy or clay soils.
  3. VP Slatted Moldboard: The VP slatted moldboard composed of independent and interchangeable slats. Reduces pulling power, due to a lower moldboard surface area. Designed for use in extremely sticky muck and clay soils. Not for use in sand or loam soils or in soils with rocks or stones. The multiple slats allow individual replacement from wear.

Share Point Options

  1. Olympic®: Reversible for maximum efficiency. More pronounced shape at wearing zones on the point for longer life and better protection of the landside. Point is self-sharpening for good ground penetration at all times.
  2. Marathon®: Reversible for maximum efficiency and features a step resulting in better landside protection.
  3. Super Marathon®: Fitted with a tungsten carbide tip. High wear resistance with four to five times the life of a traditional share point. A sharp working edge is maintained for excellent ground penetration. Excellent for highly abrasive soils without rocks or stones.

Trash Burial Options

  1. Trashboard: For trash burial in difficult conditions where the quantity of trash may otherwise block up the skimmers.
  2. Helicoidal ZH Skimmer: Helicoidal skimmers are for deep trash burial. These skimmers are well adapted to grasslands and fields with cover crops.
  3. ZRL High-Capacity Skimmer: This high-capacity skimmer is for trash incorporation throughout the soil profile. It is excellent for burying straw and corn trash.
  4. Disc Coulters Discs have a diameter of 20”, plain or notched. The disc serves to cut the furrow wall in front of the plow bottom giving a cleaner finish, and improving trash sizing and incorporation.

Plow Leg Protection

  1. Traction Bolt. A clean break of the traction bolt, following a force of 5,280 – 8,820 pounds at the plow point, avoids the risk of nuisance shearing.
  2. The bolt runs with the line of force and is pulled apart – unlike shear bolts which are cut
  3. The bolt support never deforms or becomes rounded
  4. Once the bolt breaks, it simply falls away for quick and easy replacement
  5. After years of use the plow bottoms remain perfectly inline
  6. Non-Stop Hydraulic (NSH) Reset. When a field obstacle is met, a rapid breakaway of the plow leg occurs. Once the obstacle is passes there is an increase in pressure, bringing the bottom quickly and firmly back into working position. The system also acts as a shock absorber in rocky ground, increasing plow life.
  7. Heavy-Duty Plow Leg Articulation and Tie Rod. All force is transmitted in a straight line through a one-piece forged and heat treated tie rod.

Easily Make Adjustments

Easy to Adjust Skimmers

Each skimmer is totally independent left from right and is firmly held in a sheath-like support. The skimmers are shear bolt protected and are adjustable in three directions: Forwards and backwards – with a choice of three positions, the sheath bolts to the leg support via countersunk holes to avoid any risk of free play. Up and down – rapid and precise height adjustment (7 ½” of adjustment) also with countersunk holes in the skimmer leg for easy locking of the leg at the desired height. Side to side – for correct adjustment in relation to disc coulter (where fitted).

Front Furrow Width/Angling Adjustment

The front furrow width is adjusted to its optimum setting according to the tractor linkages and ground conditions. Because of the parallelogram of the two linkages, any adjustment in front furrow width automatically adjusts the angling of the plow, allowing the tractor to always pull in perfect line. Adjustments are quickly carried out by simply adjusting the turnbuckle or by activating the hydraulic cylinder.

High-Quality Features for a Long Life

Main Beam

The main beam is supported by a side-mounted, triangular reinforcement welded along the length of the front section. This strengthens the beam in this high-stress area and gives substantial advantages when compared to a conventional plow design.

One-Piece Main Link

Designed for strength and long life, the main link is assembled with either bronze or steel bushings, depending on the model of plow.

EQUIPMENT

Standard Rubber Depth Wheel

The depth wheel follows any change of plowing width. It features simple bolt adjustments with the ability to set left and right sides independently. It can be placed in many locations on the frame to ensure optimum positioning for all conditions.

SPECIFICATIONS

SPECIFICATIONS

Number of bottoms per side
Extendable by one bottom
Standard moldboards
Hydraulic rollover with 1 cylinder
Maximum tractor power
Approximate machine weight for T version
Approximate machine weight for NSH version
Working width
Underbeam clearance
Point to point clearance
Offset and angling adjustment
Hitch
Suspension headstock
Main beam dimension
Extension beam dimension
Hydraulic beam folding
Required tractor hydraulic connections
Adjustable depth wheel with tire
Maximum outside tractor tire width when working on-land

MULTI-MASTER 153 3E MULTI-MASTER 153 4E MULTI-MASTER 153 5(4E+1) MULTI-MASTER 183 5E MULTI-MASTER 183 6(5E+1) MULTI-MASTER 183 7(5E+1+1) MULTI-MASTER 183 OL 5E MULTI-MASTER 183 OL 6(5E+1) MULTI-MASTER 183 OL 7(5E+1+1)
3 4 5 5 6 7 5 6 7
Yes Yes No Yes Yes No Yes Yes on T model, No on NSH model No
H4 long helicodial H4 long helicodial H4 long helicodial H4 long helicodial H4 long helicodial H4 long helicodial H4 long helicodial H4 long helicodial H4 long helicodial
Standard Standard Standard Standard Standard Standard
135 hp (101 kW) 180 hp (132 kW) 225 hp (166 kW) 275 hp (202 kW) 330 hp (246 kW) 385 hp (287 kW) 275 hp (202 kW) 330 hp (246 kW) 385 hp (287 kW)
2,491 lbs (1,140 kg) 3,218 lbs (1,460 kg) 3,770 lbs (1,710 kg) 4,508 lbs (2,045 kg) 5,093 lbs (2,310 kg) 5,644 lbs (2,560 kg) 5,011 lbs (2,273 kg) 5,302 lbs (2,405 kg) 5,853 lbs (2,655 kg)
2,789 lbs (1,280 kg) 3,604 lbs (1,635 kg) 4,244 lbs (1,925 kg) 4,971 lbs (2,255 kg) 5,633 lbs (2,555 kg) – 5,357 lbs (2,430 kg) 5,886 lbs (2,670 kg) –
14”, 16”, 18” (35, 40, 45 cm) delivered at 16” (40 cm) 14”, 16”, 18” (35, 40, 45 cm) delivered at 16” (40 cm) 14”, 16”, 18” (35, 40, 45 cm) delivered at 16” (40 cm) 14”, 16”, 18”, or 20” (35, 40, 45, or 50 cm) delivered at 18” (45 cm) 14”, 16”, 18”, or 20” (35, 40, 45, or 50 cm) delivered at 18” (45 cm) 14”, 16”, 18”, or 20” (35, 40, 45, or 50 cm) delivered at 18” (45 cm) 14”, 16”, 18”, or 20” (35, 40, 45, or 50 cm) delivered at 18” (45 cm) 14”, 16”, 18”, or 20” (35, 40, 45, or 50 cm) delivered at 18” (45 cm) 14”, 16”, 18”, or 20” (35, 40, 45, or 50 cm) delivered at 18” (45 cm)
31.5” (80 cm) 31.5” (80 cm) 31.5” (80 cm) 31.5” (80 cm) 31.5” (80 cm) 31.5” (80 cm) 31.5” (80 cm) 31.5” (80 cm) 31.5” (80 cm)
40” (102 cm) 40” (102 cm) 40” (102 cm) 38” (96 cm) 38” (96 cm) 38” (96 cm) 35″ (89 cm) for T models; 38″ (97 cm) for NSH models 35″ (89 cm) for T models; 38″ (97 cm) for NSH models 35″ (89 cm) for T models
Turnbuckle or optional hydraulic cylinder Turnbuckle or optional hydraulic cylinder Turnbuckle or optional hydraulic cylinder Standard Standard Standard Hydraulic offset and mechanical angling adjustment Hydraulic offset and mechanical angling adjustment Hydraulic offset and mechanical angling adjustment
Cat. 2 with cross-shaft Cat. 2 with cross-shaft Cat. 2 with cross-shaft Cat. 3 with cross-shaft Cat. 3 with cross-shaft Cat. 3 with cross-shaft Cat. 3 with cross-shaft Cat. 3 with cross-shaft Cat. 3 with cross-shaft
Standard Standard Standard Standard Standard Standard
5.9″ x 5.9″ (150 x 150 mm) 5.9″ x 5.9″ (150 x 150 mm) 5.9″ x 5.9″ (150 x 150 mm) 7.1″ x 7.1″ (180 x 180 mm) 7.1″ x 7.1″ (180 x 180 mm) 7.1″ x 7.1″ (180 x 180 mm) 7.1″ x 7.1″ (180 x 180 mm) 7.1″ x 7.1″ (180 x 180 mm) 7.1″ x 7.1″ (180 x 180 mm)
5.9″ x 5.9″ (150 x 150 mm) 5.9″ x 5.9″ (150 x 150 mm) 5.9″ x 5.9″ (150 x 150 mm) 7.1″ x 7.1″ (180 x 180 mm) 7.1″ x 7.1″ (180 x 180 mm) 7.1″ x 7.1″ (180 x 180 mm) 7.1″ x 7.1″ (180 x 180 mm) 7.1″ x 7.1″ (180 x 180 mm) 7.1″ x 7.1″ (180 x 180 mm)
Standard Standard Standard Standard (allows work in-furrow) Standard (allows work in-furrow) Standard (allows work in-furrow)
1 DA for rollover 1 DA for rollover 1 DA for rollover 2 DA for rollover and angling/offset 2 DA for rollover and angling/offset 2 DA for rollover and angling/offset 2 DA for rollover and angling/offset 2 DA for rollover and angling/offset 2 DA for rollover and angling/offset
690 x 320 mm standard 690 x 320 mm standard 690 x 320 mm standard 690 x 320 mm standard 690 x 320 mm standard 690 x 320 mm standard 690 x 320 mm standard 690 x 320 mm standard 690 x 320 mm standard
10’6” (3.2 m) 10’6” (3.2 m) 10’6” (3.2 m)

Product specifications are based on published information at the time of publication.
Product specifications are subject to change without further notice.
Contact your local KUHN Dealer for more information.

Download the Literature

MEDIA

more

Contact Us

    You Name*

    Subject*

    Email Addres*

    Message

    Contact the Red Deer Hay Center

    Phone: 403 340 1000
    Hours or Operation
    Monday to Friday: 8:30 PM to 5:00 PM
    Saturday: 8:30 AM to 12: PM
    Sunday: Closed
    eMail : ed@haycenter.com