Versatility Has Never Been So Simple
The KUHN MM 301 hay merger is designed for easy use and simple adjustments. Ultimately, this makes you more efficient in your crop harvesting, while keeping your forage cleaner than any other crop gathering system.
The KUHN MM 301 is a high performance, yet simple to operate merger for smaller farms focused on high quality hay and forage. Designed to work with mower conditioners from 9’ to 18’ of cutting width, this merger features a wide pickup and belt cross conveyor that can easily be shifted for ideal windrow placement. The windguard, exclusive in its class, evens out crop flow for superior windrow uniformity. Quickly merge two swaths into one in a single pass, or three windrows in two passes for improved harvester efficiency.
YOUR BENEFITS
Versatile & Simple
Multiple Merging Possibilities
The merger can be operated pulling directly behind the tractor, extended all the way to the right, or anywhere in between for compatibility with various sized mower conditioners.
Simple, Efficient Windguard
This standard, curved windguard greatly helps create fluffy, well-formed windrows by keeping the crop close to the pickup and delivering it to the center of the belt. This control smooths out crop bunching, resulting in improved harvester efficiency. Simple adjustment points on each end allow the operator to tailor the windguard to the exact crop type and volume. An optional high-capacity windguard is available for operators who merge higher volume crops, such as ryegrass.
Self-Contained Hydraulics
Attaching directly to the tractor PTO, the self-contained hydraulic drive allows the merger to be operated by most tractors regardless of hydraulic capacities. The MM 301 also has steel hydraulic lines on the tongue for longer life and improved system performance.
Heavy-Duty Conveyor
The 15-degree angled conveyor provides a seamless transition for the crop as it comes off the pickup. This allows the full capacity of the belt to be utilized in addition to naturally inverting the crop upon discharge.
Outstanding Flotation
The floating pickup assembly follows the terrain, supported by large-diameter gauge wheels that set the pickup height. This maintains the tine height so that valuable forage is picked up and the crop stubble is protected.
Simple, Time-Saving Features
Raise and Lower the Pickup
Pickup height is set by adjusting spacers on the gauge wheels, providing an easy, reliable system for maintaining the correct tine height from the ground. The lift linkage for the head includes a slot that allows the head to float over changing terrain without the need for a float position on the tractor’s hydraulic valve.
Belt Tension
The conveyor belt is self-cleaning and requires no tracking adjustment. The quick-release tensioning system simplifies storage and maintenance.
Reliable Pickup Design
The two-piece poly tine bar bearing greatly simplifies periodic maintenance. Unlike competitive machines, which must remove tine bars and tines to replace worn bearings, the split design allows you to replace the bearing in under one minute. Additionally, bearing life is maximized and friction properties are minimized with a specially formulated bearing material. The MM 301 also features wear sleeves on new stronger tine bars for even longer life, as well as larger cam bearings and cam tracks making the pickup even more reliable.
Simple Drawbar Attachment
Attachment to the tractor is simple. The drawbar hitch allows for fast attachment without cumbersome hitch extensions.
Options Tailored to Make your Life Easier
In-Cab Control Terminal
The optional electro-hydraulic controls manage merger functions on the go, fine-tune pickup speed, gather crop at end rows, shift the conveyor, and engage the optional extension, all conveniently from the tractor seat.
All of the following options require the in-cab control terminal.
Electronic Variable Pickup Speed Control
A manual valve is located on the machine for adjustment as needed. With the optional electronically controlled system, you can quickly and easily adjust the pickup speed from inside the cab on-the-go, to perfectly match crop conditions. With this option you can maximize leaf retention, especially if merging drier legumes, such as alfalfa.
Hydraulic On/Off Control
Create clean windrows with neat ends to maximize crop uptake and simplify the harvesting process. The simple, single button control allows the belt to be disengaged quickly to keep the crop from being sent into the headland at end rows. The gathered crop can then be sent into the subsequent windrow.
Conveyor Side Shift
You can manually adjust the conveyor up to 2’ to the right to match up with differing mower and windrow widths. With the optional hydraulically controlled conveyor side shift, you can perform the same function without leaving the cab. This is especially useful if merging behind multiple cutting units of varying widths.
EQUIPMENT
3’ Folding Conveyor
The optional conveyor extension allows operation with mower conditioner cutting widths up to 18’.(5.5 m) The extension automatically disengages when folded, while the main conveyor continues to operate.
High-Capacity Windguard
The optional high-capacity windguard is tailored to operators who are merging higher volume crops, such as ryegrass. The straight design of the windguard reduces any chance of plugging at high speeds. As with the standard curved windguard, you can easily adjust it to match your specific crop type and volume.
SPECIFICATIONS
Product specifications are based on published information at the time of publication.
Product specifications are subject to change without further notice.
Contact your local KUHN Dealer for more information.
MEDIA
Contact Us
Contact the Red Deer Hay Center
Phone: 403 340 1000
Hours or Operation
Monday to Friday: 8:30 PM to 5:00 PM
Saturday: 8:30 AM to 12: PM
Sunday: Closed
eMail : [email protected]