Maximum Productivity

The Dominator 4860 was developed with 24″ shank spacing to promote subsoil maintenance, while providing increased working widths and operator productivity. RTK working widths range from 14’ to 26’.

CONTACT US FOR PRICING
Download the Literature

The KUHN Krause Dominator® combination primary tillage machine sets new standards for residue management, compaction removal and mixing of residue in one pass. The Dominator 4860 offers a subsoil primary tillage solution that provides optimal tilled width productivity. A 24” subsoil shank spacing provides RTK cut widths of 14’ (7 shank), 18’ (9 shank), 22’ (11 shank) and 26’ (13 shank) allowing you to cover more acres per day.

YOUR BENEFITS

Residue Management

Dominator4860_CoulterGang

Coulters

Adjustable, hydraulic constant-flow 25” diameter coulters, with 8” spacing, are indexed to each sub-soil shank maintaining a uniform cutting pressure across varying soil and heavy residue. A new heavy-duty scraper bar weldment prevents residue and wet soil from building between coulter blades. Coulters are indexed so a single blade is operating on each side of the subsoil shank. Increase the coulter hydraulic down pressure for a blacker, rougher field finish or decrease coulter down pressure for a smaller clod size with an extremely level field finish. Coulter gangs are mounted with Rock-Flex™ bearing arms for added protection. Coulters feature PEER® TILLXTREME™ maintenance-free bearings.

Shank Spacing

Subsoil shanks on 24” spacing provide optimum cut widths for available horsepower per foot of cut. This double-rank design allows for a minimum of 48” between adjoining shanks for maximum “no-plug” residue and soil flow.

Dominator4860_Action05

Fracture

Shank

Compaction reduction and subsoil maintenance are accomplished through 3,000-pound point load, auto-reset subsoil shanks. Shanks are equipped with Double K™ ripper points and offer a maximum operating depth of 16 inches.

Double K® Points

Double K ripper points double the wear life of prior KUHN Krause Dominator fabricated steel and carbide-capped ripper points. Solid casting increases durability in rocky conditions. Choose between the 26.5-pound, 7” wing ripper point and the 22-pound, 2.5” straight ripper point.

DoubleK_Dominator_0

Rear Disc Conditioner

Rear Disc Conditioner

Left and right sections of the rear disc conditioner are configured in a reverse tandem design that first moves soil inward, then outward in opposite directions, to aggressively mix and bury residue, size large clods and level the soil. The disc conditioner is hydraulically controlled with a lower limit adjustment valve. Uniform 12” spacing is maintained with individually mounted, 24” fluted, shallow concavity blades. Disc conditioner blade configuration offers a level field finish while functioning within a wide range of operating speeds. Individual rear disc conditioner blade assemblies use a proven sealed bearing with a 5-bolt hub for blade attachment.

Heavy-Duty 24/7® Conditioning Reel

Choice of heavy-duty round bar or heavy-duty flat bar reel with PEER® TILLXTREME™ maintenance-free bearing assemblies mounted on heavy-duty ductile cast bearing arms provides aggressive clod sizing and soil firming. Hydraulic control for reel lift is standard.

HDConditioningReel

EQUIPMENT

Guardian Hitch™

This exclusive option guards against stress on the tractor drawbar and implement frame. Lateral drawbar forces are transferred through the hitch pivot where shock load from steering input is dampened by urethane blocks. Choose from the articulating ball Cat III, IV or V double-bolt, cast hitch, depending on model.

Single-Point Depth Control – Standard

Shank depth is controlled conveniently with the crank-adjustable depth stop located at the front of the machine. View working depth on the easy-to-read scale.

Heavy-Duty Walking Beams – Standard

Standard on the center section of all Dominator models, heavy-duty 8-bolt hubs with slip-in wheel spindles secured by a single bolt ensure durability and easy maintenance.

Tractor Interface Center

The tractor interface center prevents hydraulic hoses from binding in turns and adds operator convenience. Includes hose routing chart, color coded hose grips, storage for light hookup and owner’s manual.

SPECIFICATIONS

SPECIFICATIONS

Transport Width
Transport Height
Frame Type
Number of Shanks
Shank Spacing
Working Width
Shipping Weight Less Reel Option
Shipping Weight Less Reel Option

4860-7 4860-9 4860-9F 4860-11 4860-13
16’1″ (4.9 m) 18’7″ (5.7 m) 15’4″ (4.7 m) 17’9″ (5.4 m) 17’9″ (5.4 m)
Not Applicable 11’4″ (3.5 m) 11’6″ (3.5 m) 12’2″ (3.7 m) 13’6″ (4.1 m)
Rigid Rigid Folding Folding 3-Section Folding 3-Section
7 9 9 11 13
24″ (61 cm) 24″ (61 cm) 24″ (61 cm) 24″ (61 cm) 24″ (61 cm)
14″ (4.3 m) 18″ (5.5 m) 18″ (5.5 m) 22″ (6.7 m) 26″ (7.9 m)
17,420 lb (7 902 kg) 21,483 lb (9 745 kg) 23,119 lb (10 487 kg) 29,780 lb (13 508 kg) 32,308 lb (14 655 kg)
18,483 lb (8 384 kg) 22,806 lb (10 345 kg) 24,503 lb (11 114 kg) 31,240 lb (14 170 kg) 34,125 lb (15 479 kg)

STANDARD EQUIPMENT

Hitch Type
Tongue Type
Depth Control
Hydraulics
Coulter Blades
Coulter Gangs
Shanks
Points
Main Frame Wheels
Wing Frame Wheels
Hydraulic Controlled Rear Disc Conditioner
Rear Conditioning Reel
Hydraulic Controlled Conditioning Reel
Transport Locks and Safety

4860-7 4860-9 4860-9F 4860-11 4860-13
CAT IV Articulating Ball Hitch for 2″ Pin CAT IV Articulating Ball Hitch for 2″ Pin CAT IV Articulating Ball Hitch for 2″ Pin CAT IV Articulating Ball Hitch for 2″ Pin CAT IV Articulating Ball Hitch for 2″ Pin
Rigid, Mechanical Adjustable, Self-Leveling Tongue Rigid, Mechanical Adjustable, Self-Leveling Tongue Rigid, Mechanical Adjustable, Self-Leveling Tongue Guardian Hitch™ (Cushion Tongue) Guardian Hitch™ (Cushion Tongue)
Single Point Hydraulic Depth Control Single Point Hydraulic Depth Control Single Point Hydraulic Depth Control Single Point Hydraulic Depth Control Single Point Hydraulic Depth Control
Color-Coded Hydraulic Hose Grips, All Hydraulic Hoses Color-Coded Hydraulic Hose Grips, All Hydraulic Hoses Color-Coded Hydraulic Hose Grips, All Hydraulic Hoses Color-Coded Hydraulic Hose Grips, All Hydraulic Hoses Color-Coded Hydraulic Hose Grips, All Hydraulic Hoses
25″ x ¼” Smooth 25″ x ¼” Smooth 25″ x ¼” Smooth 25″ x ¼” Smooth 25″ x ¼” Smooth
8″ Spacing, Adjustable Constant Flow Hydraulic, Heavy-Duty 6″ Bell Diameter Ductile Iron Spools, 1-¾” Diameter Round Alloy Tie Rod with Maintenance-Free PEER® TILLXTREME™ Bearings, C-Type Rock-Flex™ Bearing Arms 1-¼” x 2-½” 8″ Spacing, Adjustable Constant Flow Hydraulic, Heavy-Duty 6″ Bell Diameter Ductile Iron Spools, 1-¾” Diameter Round Alloy Tie Rod with Maintenance-Free PEER® TILLXTREME™ Bearings, C-Type Rock-Flex™ Bearing Arms 1-¼” x 2-½” 8″ Spacing, Adjustable Constant Flow Hydraulic, Heavy-Duty 6″ Bell Diameter Ductile Iron Spools, 1-¾” Diameter Round Alloy Tie Rod with Maintenance-Free PEER® TILLXTREME™ Bearings, C-Type Rock-Flex™ Bearing Arms 1-¼” x 2-½” 8″ Spacing, Adjustable Constant Flow Hydraulic, Heavy-Duty 6″ Bell Diameter Ductile Iron Spools, 1-¾” Diameter Round Alloy Tie Rod with Maintenance-Free PEER® TILLXTREME™ Bearings, C-Type Rock-Flex™ Bearing Arms 1-¼” x 2-½” 8″ Spacing, Adjustable Constant Flow Hydraulic, Heavy-Duty 6″ Bell Diameter Ductile Iron Spools, 1-¾” Diameter Round Alloy Tie Rod with Maintenance-Free PEER® TILLXTREME™ Bearings, C-Type Rock-Flex™ Bearing Arms 1-¼” x 2-½”
3,000lb Point Load Spring Reset Parabolic Sub-Soil Shank, 1-¼ x 4″ Shank Size with Wear Bar, 21″ Trip Height, 39″ Underframe Clearance, 16″ Working Depth 3,000lb Point Load Spring Reset Parabolic Sub-Soil Shank, 1-¼” x 4″ Shank Size with Wear Bar, 21″ Trip Height, 39″ Underframe Clearance, 16″ Working Depth 3,000lb Point Load Spring Reset Parabolic Sub-Soil Shank, 1-1/4 x 4″ Shank Size with Wear Bar, 21″ Trip Height, 39″ Underframe Clearance, 16″ Working Depth 3,000lb Point Load Spring Reset Parabolic Sub-Soil Shank, 1-¼” x 4″ Shank Size with Wear Bar, 21″ Trip Height, 39″ Underframe Clearance, 16″ Working Depth 3,000lb Point Load Spring Reset Parabolic Sub-Soil Shank, 1-¼” x 4″ Shank Size with Wear Bar, 21″ Trip Height, 39″ Underframe Clearance, 16″ Working Depth
Double K® Chromium Carbide, 7″ Winged Ripper Points Double K® Chromium Carbide, 7″ Winged Ripper Points Double K®  Chromium Carbide, 7″ Winged Ripper Points Double K®  Chromium Carbide, 7″ Winged Ripper Points Double K®  Chromium Carbide, 7″ Winged Ripper Points
(4) 360/65R17.5 Metric Tires, Walking Beams, Slip-In Spindles, Maintenance-Free Spherical Bearings, 8-Bolt Heavy-Duty Hubs (4) 360/65R17.5 Metric Tires, Walking Beams, Slip-In Spindles, Maintenance-Free Spherical Bearings, 8-Bolt Heavy-Duty Hubs (4) 360/65R17.5 Metric Tires, Walking Beams, Slip-In Spindles, Maintenance-Free Spherical Bearings, 8-Bolt Heavy-Duty Hubs (4) 440/55R18 Metric Tires, Walking Beams, Slip-In Spindles, Maintenance-Free Spherical Bearings, 8-Bolt Heavy-Duty Hubs (4) 440/55R18 Metric Tires, Walking Beams, Slip-In Spindles, Maintenance-Free Spherical Bearings, 8-Bolt Heavy-Duty Hubs
Not Applicable Not Applicable Not Applicable (1) 360/65R17.5 per Wing 8-Bolt Hub (1) 360/65R17.5 per Wing 8-Bolt Hub
24″ x 6 Gauge, Fluted Shallow Concavity Disc Blades, 12″ Blade Spacing, Remote Single-Point Hydraulic Lower Limit Stop, Reversed Tandem Design 24″ x 6 Gauge, Fluted Shallow Concavity Disc Blades, 12″ Blade Spacing, Remote Single-Point Hydraulic Lower Limit Stop, Reversed Tandem Design 24″ x 6 Gauge, Fluted Shallow Concavity Disc Blades, 12″ Blade Spacing, Remote Single-Point Hydraulic Lower Limit Stop, Reversed Tandem Design 24″ x 6 Gauge, Fluted Shallow Concavity Disc Blades, 12″ Blade Spacing, Remote Single-Point Hydraulic Lower Limit Stop, Reversed Tandem Design 24″ x 6 Gauge, Fluted Shallow Concavity Disc Blades, 12″ Blade Spacing, Remote Single-Point Hydraulic Lower Limit Stop, Reversed Tandem Design
24/7® Soil Conditioning with Float Position, Heavy-Duty Round Bar Spiral Reels, PEER® TILLXTREME™ Maintenance-Free Bearings 24/7® Soil Conditioning with Float Position, Heavy-Duty Round Bar Spiral Reels, PEER® TILLXTREME™ Maintenance-Free Bearings 24/7® Soil Conditioning with Float Position, Heavy-Duty Round Bar Spiral Reels, PEER® TILLXTREME™ Maintenance-Free Bearings 24/7® Soil Conditioning with Float Position, Heavy-Duty Round Bar Spiral Reels, PEER® TILLXTREME™ Maintenance-Free Bearings 24/7® Soil Conditioning with Float Position, Heavy-Duty Round Bar Spiral Reels, PEER® TILLXTREME™ Maintenance-Free Bearings
Yes Yes Yes Yes Yes
Hydraulic Valves, Transport and Wing Fold, Slow Moving Vehicle Sign, High-Visibility LED Lighting Hydraulic Valves, Transport and Wing Fold, Slow Moving Vehicle Sign, High-Visibility LED Lighting Hydraulic Valves, Transport and Wing Fold, Slow Moving Vehicle Sign, High-Visibility LED Lighting Hydraulic Valves, Transport and Wing Fold, Slow Moving Vehicle Sign, High-Visibility LED Lighting Hydraulic Valves, Transport and Wing Fold, Slow Moving Vehicle Sign, High-Visibility LED Lighting

OPTIONAL EQUIPMENT

Hitch Type
Tongue Type
Points
Rear Conditioning Reel
Rear Conditioning Reel
Hydraulic Controlled Conditioning Reel

4860-7 4860-9 4860-9F 4860-11 4860-13
CAT III Articulating Ball Hitch for 1-1/2″ Pin CAT III Articulating Ball Hitch for 1-1/2″ Pin CAT III Articulating Ball Hitch for 1-1/2″ Pin CAT V Articulating Ball Hitch for 2-3/4″ Pin CAT V Articulating Ball Hitch for 2-3/4″ Pin
Guardian Hitch™ (Cushion Tongue) Guardian Hitch™ (Cushion Tongue) Guardian Hitch™ (Cushion Tongue) Mechanical Adjustable, Self-Leveling Tongue Mechanical Adjustable, Self-Leveling Tongue
Double K® 2-½” Cast Chromium Carbide, Straight Ripper Point Double K® 2-½” Cast Chromium Carbide, Straight Ripper Point Double K® 2-½” Cast Chromium Carbide, Straight Ripper Point Double K® 2-½” Cast Chromium Carbide, Straight Ripper Point Double K®  2-½” Cast Chromium Carbide, Straight Ripper Point
None None None None None
24/7® Soil Conditioning with Float Position, Heavy-Duty Flat Bar Spiral Reels, PEER® TILLXTREME™ Maintenance-Free Bearings 24/7® Soil Conditioning with Float Position, Heavy-Duty Flat Bar Spiral Reels, PEER® TILLXTREME™ Maintenance-Free Bearings 24/7® Soil Conditioning with Float Position, Heavy-Duty Flat Bar Spiral Reels, PEER® TILLXTREME™ Maintenance-Free Bearings 24/7® Soil Conditioning with Float Position, Heavy-Duty Flat Bar Spiral Reels, PEER® TILLXTREME™ Maintenance-Free Bearings 24/7® Soil Conditioning with Float Position, Heavy-Duty Flat Bar Spiral Reels, PEER® TILLXTREME™ Maintenance-Free Bearings
None None None None None

OPERATING INFORMATION

Recommended Tractor Power
Working Depth Range
Recommended Operating Speed

4860-7 4860-9 4860-9F 4860-11 4860-13
40 – 50 ENG HP/shank (29 – 37 kW/shank) 40 – 50 ENG HP/shank (29 – 37 kW/shank) 40 – 50 ENG HP/shank (29 – 37 kW/shank) 40 – 50 ENG HP/shank (29 – 37 kW/shank) 40 – 50 ENG HP/shank (29 – 37 kW/shank)
8″ – 16″ (20.3 – 40.6 cm) 8″ – 16″ (20.3 – 40.6 cm) 8″ – 16″ (20.3 – 40.6 cm) 8″ – 16″ (20.3 – 40.6 cm) 8″ – 16″ (20.3 – 40.6 cm)
4 – 7 mph (6 -11 km/h) 4 – 7 mph (6 -11 km/h) 4 – 7 mph (6 -11 km/h) 4 – 7 mph (6 -11 km/h) 4 – 7 mph (6 -11 km/h)

Product specifications are based on published information at the time of publication.
Product specifications are subject to change without further notice.
Contact your local KUHN Dealer for more information.

Download the Literature

MEDIA

more

Contact Us

    You Name*

    Subject*

    Email Addres*

    Message

    Contact the Red Deer Hay Center

    Phone: 403 340 1000
    Hours or Operation
    Monday to Friday: 8:30 PM to 5:00 PM
    Saturday: 8:30 AM to 12: PM
    Sunday: Closed
    eMail : ed@haycenter.com