The 980 is part of our CMF series of vertical mixers that cut materials like hay, straw and corn stocks.
They also mix materials like distillers, silage, corn and more.
Standard Features
MIXING CAPACITY: The CMF-980 has a 980 cu. ft. mixing capacity with a tare weight of 30,900 lbs
UNLOADING DOOR: Large 24” x 42” unloading door for fast, even unloading and clean-out.
AUGERS: Heavy-duty 88” screw augers with self-sharpening serrated knives, driven by 2 HD USA gearboxes.
OSCILLATING AXLES: Oscillating Heavy Duty Axles with 4) 385/65 R 22 20- ply rated tires provide even weight distribution on uneven or frozen ground.
HEAVY-DUTY FRAME: The CMF-980 is built with a heavy-duty 6” x 10” x 3/8” steel tube frame for strength and durability
CV PTO WITH 2-SPEED GEAR BOX: The CMF-980 comes equipped with a heavy-duty 1 ¾” constant velocity 1000 rpm PTO with a 2-speed gearbox. The 2-speed gearbox is needed for loaded startups and heavy rations.
Optional Features
Unloading Options
Cross Conveyor only with right- or left-hand drives.
Cross Conveyor with spouts or endgates. Magnets are available for the spouts.
Cross Conveyor with hydraulic conveyor extension. Available in right-hand, left-hand, or both right- and left-hand unload. The dual discharge unit can only unload from one side at a time. Spouts and optional magnets are also available.
Dogleg style conveyor also available
Magnets on discharge spouts
Magnets on the spouts remove ferrous metal, such as bale wire, from feed, providing the highest quality feed available.
Rear discharge door
The optional rear discharge door provides an additional means of discharging feed.
2-Speed Gear Box
The 2-speed gear box is used for heavy starts after transporting heavy rations to protect the tractor PTO and mixers drive train.
Digi-Star Scale
Choose from any Digi-Star scale indicator Also available are optional Digi-Star Feed Management Programs
FEATURES & BENEFITS
SPECIFICATIONS
| WEIGHT | |
|---|---|
| Total | 19,100 lbs (8,663.61 kg) |
| Tongue Weight | 2,480 lbs (1,124.91 kg) |
| TRANSPORT DIMENSIONS | |
| Width | 10′ 6″ (3.2 m) |
| Length | 25′ 7″ (7.8 m) |
| Height | 11′ 2″ (3.4 m) |
| WORKING DIMENSIONS | |
| Width | Between 10′-6″ and 12′-4″ Depending on Conveyor |
| Loading Height | 11′ 2″ (3.4 m) |
| CHASSIS FEATURES | |
| Towing Arrangement | V-Block or Clevis type hitch |
| Jack Capacity | 7,000 lbs. (3,175.1 kg) |
| Jack Travel | 10 in. (25.4 cm) |
| Tires | (4) 385/65 R 22.5 20-ply |
| Axle | Oscillating |
| Bearing Type | Tapered Roller |
| Extensions | 12″ rubber (standard) |
| CAPACITIES | |
| Mixing Capacity W/ 12″ Extension | 980 cu. ft. (27.75 cu. m) |
| Gross Weight Capacity | 50,000 lbs. (22,679 .62 kg) |
| Tare Weight – TMR | 30,900 lbs (14,016 kg) |
| AUGERS | |
| Number | 2 |
| Diameter | 88 in. (223.52 cm) |
| Flighting Thickness | 5/8 in. (1.59 cm) |
| Number / Thickness Knives | 14-5/16″ (0.794 cm) thick Self-Sharpening |
| DRIVELINE AND GEAR BOXES | |
| Drive Line | 44E Series Drivelines With Two-Speed Gearbox (Standard Equipment) |
| Clutch | Free Motion Automatic Clutches (2) |
| Gearboxes | (2) HD Gear Boxes With 2-Year Warranty |
| UNLOADING CONVEYOR | |
| Type | 36 in. (91.44 cm) Chain Without Hydraulic Orbital Motors |
| Discharge Height | 26 5/8 in. (67.63 cm) to 55 in. (139.7 cm) |
| Discharge Options | left, right, both, rear commodity door |
| MISCELANEOUS | |
| Door Opening | 24 in. (60.96 cm) x 42 in. (106.68 cm) |
| Floor Thickness | 3/4 in. (1.91 cm) |
| Side Wall Thickness | 1/4 in. (0.635 cm) with 24″ (60.96 cm) 12 Gauge Replaceable Steel Wall Liner |
| Scale | Digi-Star 4-Point Scale With Optional Digi-Star Scale Monitor |
| Observation Windows | 2 |
| REQUIREMENT FOR OPERATION | |
| PTO Horsepower Required | 150 HP minimum recomended |
| PTO Type | 1,000 rpm, 1 3/4″ Dia with 20 Spline or 1,000 rpm, 1 3/8″ Dia with 21 Spline |
| SMV Sign and Road Lights | Standard Equipment |
| Electrical | 12 VDC (battery included) |
MEDIA
Contact Us
Contact the Red Deer Hay Center
Phone: 403 340 1000
Hours or Operation
Monday to Friday: 8:30 PM to 5:00 PM
Saturday: 8:30 AM to 12: PM
Sunday: Closed
eMail : ed@haycenter.com