The Anderson pull type A520 twin auger mixer (side trap discharge) has the ability to mix the widest variety of ingredients. Process large amount of hay, even complete square and round bales of baleage. Available with several discharge options. Whether your rations are designed to increase milk production of dairy cows or minimize variation in feed for each group you feed, vertical mixer will help optimize the dry matter and nutrient intake of your herd.
FEATURES & OPTIONS
- Capacity 520 pi3 à 666 pi3.
- Reinforced tub fl oor provides longevity of the tub and also to the load cells by equalizing the weight uniformly.
- TRI-CUT™, auger with 2-position adjustable and reversible knives (10 standard) and 2 sweeping dispensers ensuring a 30% faster and more consistent discharge.
- Discharge options: Side trap or front conveyor.
- Carbide treated self-sharpening tungsten knives.
- Industry’s fi rst hydraulic TRUE-CUT™ restrictor blades allows the operator to engage and disengage during the mixing process preventing all risks of overprocessing feed.
- The DG500 indicator is a universal, programmable weighing indicator for recipes, dispensing and data storage. It guarantees an extremely precise weighing thanks to the protected load cells and strategically located under the tank. Compatible with the DTM suite.
- 3-point scale system.
- Rolled side walls (not bent) for better fl ow of material, avoiding restriction around auger and naturally increased sturdiness.
- SMART CONTROL remote control (optional) provides you full wireless control to: customize weighing system and recipe, hydraulics, speed of belt etc.
- Optional 2 speed gearbox.
SPECIFICATIONS
| Capacity (no capacity extension) | 520 ft3 (14.7 m3) |
| 6 in capacity extension | 574 ft3 (16.3 m3) |
| 12 in capacity extension | 628 ft3 (17.8 m3) |
| 18 in capacity extension | 682in(208cm) ft3 (19.3 m3) |
| Number of Auger | 2 |
| Length (A) | 242 in (6.15 m) |
| Height (B) no extension | 102 in (2.59in(150cm) m) |
| 6 in capacity extension | 108 in (2.74 m) |
| 12 in capacity extension | 114 in (2.9 m) |
| 18 in capacity extension | 120 in (3.05 m) |
| Hay retention ring (additionnal height) | 0 in / 3,5 in |
| Width (C) | |
| Without incline conveyor | 101 in (2.57 m) |
| With incline conveyor (retracted) | 115 in (2.92 m) |
| Incline conveyor operating angle (degrees) | 226 @39 degrees |
| Outside width of the wheels | 99 in (2.51 m) |
| Lateral distance to discharge point (D) | |
| Incline conveyor chain / belt 3 ft at min.26 angle /max 40 | 29-22in at 26º / 27-20in at 40º |
| Incline conveyor chain / belt 4 ft at min. 26 angle /max 40 | 38-42in at 26º / 51-51in at 40º |
| Incline conveyor chain / belt 5 ft at min. 26 angle /max 40 | 44-48in at 26º / 61-61in at 40º |
| Incline conveyor chain / belt 6 ft at min. 26 angle /max 40 | 48-52in at 26º / 67-67in at 40º |
| Incline conveyor chain / belt 7 ft at min. 26 angle /max 40 | 54-58in at 26º / 77-77in at 40º |
| Incline conveyor chain / belt 8 ft at min. 26 angle /max 40 | 58-62in at 26º / 84-84in at 40º |
| Discharge height (E) | |
| Incline conveyor chain / belt 3 ft at min. 26 angle /max 40 | 34-38in at 26º / 44-44in at 40º |
| Floor ST (E1) / Conveyor FD (E2) to ground | 34 in (0.85 m) |
| PTO shaft – Standard specification | 540 RPM 1″ 3/8 Z6 |
| PTO shaft – Option specification | 1000 RP m 1″ 3/8 Z21 |
| 2 speed Gear Box | Optional |
| 2 Speed Gear Box and ratio | C3A-R, 1;1,5 54in(888cm)0 RPM C3A-R, 1,8;2,7 1000 RPM |
| Minimum PTO HP Requirement – Low Speed | 80 |
| Minimum PTO HP Requirement – High Speed | 120 |
| Auger RPM – Low Speed | 27 RPM |
| Auger RPM – Standard High speed | 41 RPM |
| Standard planetary model and ratio configuration | 1602 @13.4 |
| Optionnal Planetary | N/A |
| Floor Thickness (AR235 grade or equivalent) | 5/8 in |
| Sidewall Thickness (AR235 grade or equivalent) | 1/4 in |
| Flighting Thickness (AR235 grade or equivalent) | 5/8 in |
| Standard knives per auger | 6 / 10 optional |
| Driveline security | Shear bolt |
| Hydraulic flow requirement | 10-15 US gal/ m in 37-56 L/ m in |
| Hydraulic pressure | 160-200 bar (2300-2900 psi) |
| Load cell | 3 |
| Scale system | DG500 (standard) |
| Machine Weight (empty) – STD configuration | 11 744 lb (5326 kg) |
| Utility load capacity | 15 080 lb (6839 kg) |
| Axle – Standard specifications | Single |
| Axle – Optional specifications | N/A |
| Wheels – Standard specifications | 385/65R22.5-20 |
MEDIA
Contact Us
Contact the Red Deer Hay Center
Phone: 403 340 1000
Hours or Operation
Monday to Friday: 8:30 PM to 5:00 PM
Saturday: 8:30 AM to 12: PM
Sunday: Closed
eMail : [email protected]