Orbital High Speed Twin Dispenser Round Bale Wrapper
The McHale Orbital high-speed round bale wrapper harnesses the proven vertical wrapping ring technology used in the McHale Fusion such as the patented high-speed transfer system and the patented tip roller to deliver a high-output, low-maintenance wrapper which is capable of keeping up with multiple balers.
These patents ensure high output and superior levels of forage quality are achieved.
Overview
The McHale Orbital is a high-speed round bale wrapper which delivers an even and consistent overlap and achieves optimum levels of fodder preservation and quality.
Standard Features
| Fully Automatic Operation | Patented High-Speed Bale Loading | High-Speed Vertical Wrapping Ring |
| Wrap Bales from 1.1m – 1.45m (3’7″ to 4’9″) | Proven and Reliable Cut & Hold System | Gentle Bale Tip after Wrapping |
| Film Break Sensors | Facility to Wrap with One Roll
Easy Film Loading |
Expert Plus Control Console |
FEATURES
High-Speed Vertical Wrapping Ring
Once the bale is loaded onto the bale wrapper, the high-speed vertical wrapping ring can apply four layers of film to a 1.25m (4′) bale in approximately 18 seconds or six layers of film in under 25 seconds.
High-Speed Transfer System
As the lift arm moves the bale onto the wrapping platform, the front roller pivots down to reduce the height the bale has to travel to the wrapping position. This design allows the bale to transition in a smooth and quick manner that is stress-free on the machine. The lift arm also has the ability to carry a bale while another is being wrapped, delivering higher output.
Tip Roller
Through the use of the patented tip roller, the McHale Orbital bale wrapper can wrap bales from 1.1m up to 1.45m (3’7″–4’9″) with ease. The patented tip roller adjusts its height in line with bale size to ensure that the wrapping ring always applies the plastic to the centre of the bale, regardless of the bale diameter. This ensures a correct and even overlap is always achieved.
Heavy-Duty Lift Arm
The heavy-duty lift arm also has the ability to carry a bale while another bale is being wrapped, delivering higher output.
Cut & Hold System
At the end of the wrapping cycle, the hydraulically operated cut & hold system cuts and holds the film in position ready to wrap the next bale.
Automatic Film Break Sensors
Automatic film break sensors monitor the plastic as it leaves the dispenser rollers. If plastic breaks or runs out, the machine will notify the operator via the control console.
Easy Film Loading
Both dispensers are easily loaded from the left side of the machine. When the first roll is loaded, an index button rotates the second dispenser around to the same location on the machine.
Extra Film Storage with Easy Handling
The McHale Orbital can carry 8 rolls of film:
2 rolls in the dispensers + 6 spare rolls in film storage
Control Options
The Expert Plus control console provides clear indicators of machine performance on it’s large graphic display and with the load sensing valve, makes the high-speed wrapping operation fully automatic.
Bale Tip/ Side Tip (Optional)
When tipping off the bale, the rear wrapping roller moves downwards to gently place the tightly wrapped bale on the ground.
SPECIFICATIONS
| Transport Length | 4.35 m (14′ 3″) |
| Transport Width | 2.74 m (9′)* |
| Transport Height | 3.0 m (9′ 3″) |
| Height to Top of Rollers | N/A |
| Weight (unladen) | 2400 kg (5391 lbs) |
*Width will depend on tyre selection
| Bale Size | 1.48 m (4’9″) |
| Aluminum Dispensers | 2 x 750 mm |
| Film Stretch | 70% Standard
55% Optional |
| Wrapping Speed (up to) | 40 rotations/min |
| Wrapping System | Wrapping Ring
(Fusion System) |
| Protection Mechanism | Relief Valve |
| Lift Capacity
@ 170 bar |
1200 kg (2646 lbs) |
| Driver Control | Expert Plus Control Console |
| Operation | Automatic & Manual |
| Radio Remote Control | Optional |
| Film Roll Capacity | X 8 (2+6) |
| Cut & Hold | Yes |
| Bale Wrap Monitor | Yes |
| Road Lights | Yes |
| Greasing Points | 22 |
| Wheel Dimensions | Standard: 380/55-17
Optional: 480/45-17 |
| Axle | 6 Stud |
| Attachment to Tractor | Pin Hitch |
| Min. Hydraulic Requirements | 35 l/min @ 170 bar |
| Hydraulic Connections | 2 x 1/2″ QR’s Open
or Closed Centre or Load Sensing |
| Electrical Requirements | 12v 10A EuroPlug or Direct from Battery |
| Minimum hp Requirement | 45 kW / 60 hp |
MEDIA
Contact Us
Contact the Red Deer Hay Center
Phone: 403 340 1000
Hours or Operation
Monday to Friday: 8:30 PM to 5:00 PM
Saturday: 8:30 AM to 12: PM
Sunday: Closed
eMail : [email protected]