Bales go in. Loose hay comes out.

Do it all with the 1150 Tub Grinder from Haybuster. With the optional grapple loader, you’re able to do everything with one piece of equipment that you know won’t fail you. Find solutions for:

  • Grinding Hay – big round & square bales, loose hay
  • Grinding Crop Residues – straw, stover and other types
  • Grinding Grain – corn, sorghum, and all cereal grains
  • Commercial grinding applications
CONTACT US FOR PRICING
Download the Literature

Standard Features

  • 29-foot fabricated boom
  • Wider each grapple 8’4”
  • Replaceable grapple teeth
  • Cab rotates 270 degrees with boom
  • Cab raises 4 ft. for unobstructed view and operation comfort
  • 540 HP (403 kw) Cat C15 Electronic Diesel Engine: Enclosed engine compartment with self-cleaning air intake system
  • Electric/hydraulic joystick controls
  • Hydraulic outrigger legs for increased stabilization
  • All controls for grinder are in the loader cab, as well as on the main control panel
  • Weigh scale control panel easily monitored from the cab seat.

Standard Features

  • Optional scale on grapple weighs individual bales

FEATURES & BENEFITS

null

Command Console with Optional Remote Control

A central command console is conveniently located and controls all the functions of the machine. An optional remote control is available to keep you out of the dust. It controls the tubrotation, conveyor lift, conveyor articulation, and engine stop. The electronic governor keeps the engine RPMs constant resulting in increased efficiencies and constant load. Additionally, the 1150 with grapple loader offers duplicate controls in the 7000 series loader cab.
null

Rotary Self-Cleaning Screen

A central command console is conveniently located and controls all the functions of the machine. An optional remote control is available to keep you out of the dust. It controls the tub rotation, conveyor lift, conveyor articulation, and engine stop. The electronic governor keeps the engine RPMs constant, resulting in increased effeciencies and constant load.
null

C15 Caterpillar Electronic Diesel Engine

Powered by either a 475 HP (354 kw) or a 540 HP (403 kw) C15 Caterpillar Electronic diesel engine whose state-of-the-art electronic fuel injection system, this engine decreases fuel consumption. This allows it to produce ground hay at a rate that will make you money on every job. It’s strong enough to chew through those tough, wet bales, and it has all the features you’ve come to expect from Caterpillar, including reliability, cold weather starting, unsurpassed product support, and proven resale value.

null

KPTO Fluid Coupler

The KPTO fluid coupler transmits power with up to 98% efficiency and eliminates the mechanical clutch. It’s good proof. It can engage or disengage at full engine RPM without damage and requires minimal maintenance.

null

50 Degree Oscillating Stacking Conveyor

The 30 in. wide x 26 ft. long stacking conveyor piles hay to over 18 feet in height. The conveyor can oscillate left to right up to 50 degrees, which means you can not only make the pile tall, you can make it wide as well.

null

50” Big Bite Hammermill

The Big Bite hammermill is located at the rear of the sub frame, reducing the length of the belly conveyor, improving the belly conveyor service accessibility, and moving the dust away from the operator. The hammermill is also dynamically balanced to give you smoother operation, longer life, and less maintenance.

null

90 Degree Tub Tilt

The 11 ft. wide x 50 in. deep tilt tub opens a full 90 degrees for access to the hammermill and screens as well as for normal servicing.

null

11’ Tub with Tip in Tub Flares (Sides)

The 11 ft. wide x 50 in. deep tub has tip in tub flares (sides). The sides are folded in to narrow the transport width of the grinder.

null

Enclosed Engine Compartment with Easy Engine Access

The enclosed engine compartment and rotary self-cleaning screen protects the engine from dirt and debris buildup. An enclosed engine compartment also reduces the noise level. The 1150 with grapple loader also gives you easy access to the engine with a 3-door entry on either side, plus a front door to the radiator.

null

7000 Series Grapple Loader with Cab

The 7000 series cab rotates 270 degrees with the boom, includes all controls for operating the grinder along with electro/hydraulic joystick controls for grapple loader operation, has hydraulic outrigger legs for increased stability, and the cab can be raised up to 4 feet for unobstructed view and operator comfort.

null

29’ Grapple Loader

The 7000 series grapple loader features a 29’ fabricated boom, 8’4” wide reach grapple, replaceable grapple teeth, and an optional scale on the grapple can weigh individual bales.

SPECIFICATIONS

WEIGHT
Total 32,350 lbs. (14,704.5 kg)
TRANSPORT DIMENSIONS
Width 10 ft (3.048 m)
Height 11 ft 6 in (3.51 m)
Length 31 ft (9.448 m)
7000 SERIES GRAPPLE LOADER
Boom Length 29 ft. (8.85 m)
Rotation 270 degree
Wide Reach Grapple 8′ 4″ (2.54 m)
ENGINE
Manufacturer CATERPILLAR
Model C15
Type In-line, 6 cylinder, 4 -Stroke Diesel
Power Rating 475 HP (354 kw) or 540 HP (403 kw)
Bore 5.4 in (137 mm)
Stroke 6.5 in (165 mm)
Displacement 983 cu. in. (14.6 L)
Fuel System Electronic Unit Injector
Aspiration Turbocharged and air to air aftercooling
Compression Ratio 16.25 : 1
Rotation (from flywheel end) Counter-clockwise
Engine Housing A sealed enclosure with a rotary screen at the front that removes debris from the air prior to being drawn through the radiator. Air is directed around engine components to provide surface cooling and discourages dust buildup. Air exits out the bottom between the engine and right and left frame channels. 3 generous sized service access doors are provided on both the right and left sides.
Radiator Staggered Core with 7 fins per inch
Cooling System 9.2 gal. (34.8 L)
Lube Oil System (refill) 10 gal (38 L)
Engine Air Induction Clean air is drawn in front of radiator through an inline separator and dry type air filter with safety element.
Engine Block Heater 120V / 2000 watt
FLUID COUPLING
Manufacturer TRANSFLUID
Model Model KPTO-19 Fluid Coupling
Type Drain Type Fluid Coupling
Charge Pump Gear type
Cooler Oil to air, thermostatic controlled electric fan
Features Unloaded engine warm-up, smooth startup, shock and overload protection, absorbs vibrations, electric/hydraulic control valve
Maintenance Easy access oil filter and drain plug
Fluid Capacity 9.24 gal (35 L)
HYDRAULIC SYSTEM
Cooler Oil to Air, radiator mounted
Pump Gear type, 2 section, output is 25 & 15 gpm @ 2100 psi., engine mounted
Control Valves Electric/Hydraulic, 4 valves – 1) 4 spool, 2) single spool, and 1 proportioning
Reservoir Capacity 50 gallon (171 liter)
Tub Tilt 3 in x 30 in (7.62 x 76.2 cm) Hydraulic Cylinder
Conveyor Lift 2) 3 in x 36 in ( 7.62 x 91.44 cm) Hydraulic Cylinders
Conveyor Fold 2) 3 in x 30 in (7.62 x 76.2 cm) Hydraulic Cylinder
Conveyor Articulation 2) 2 in x 8 in (5.08 x 20.3 cm)
CHASSIS FEATURES
Fire Suppression 2) 20 lbs (9.09 kg) Fire Extinguishers, front mounted on the right and left side of
the main frame
Fuel Capacity Truck Dependent
Lights Clearance, Directional, and Brake
Towing Arrangement Truck Mounted
Axle Truck dependent
Brakes Truck dependent
Tires Truck dependent
HAMMERMILL
Length 50″ (127 cm)
Diameter, Hammers Extended 26″ (66.04 cm)
Feed Opening 25 in x 52 in (63.5 cm x 133 cm)
Mill Feeding Mill Grate
Hammers 1/2” (1.27 cm) AR-Hardened Steel , Swing
Number of Hammers 88
Hammer Rods 1-1/4 in (31.75 mm) dia., Case Hardened
Mill Plates 1/2″ (1.27 cm) thick X 16″ (40.64 cm) dia.
Mill Shaft 4-1/2 in (114.3 mm), Stress Proof Steel
Bearings 4 in (101.6 mm), Pillow Block Bearings
Drive Direct from Fluid Coupling
Screens 1/8 in (3.18 mm), 3/16 in (4.76 mm), or 1/4 in (6.35 mm) thick and various hole sizes from 1/8 in (3.18 mm) to 8 in (203.2 mm)
Screen Area 2,781 sq. in. (7,063.75 sq. cm.)
TUB FEATURES
Loading Height 9 ft 6 in (2.89 m)
Tub Width 11 ft (3.35 m)
Depth 50 in. (127 cm)
Tub Diameter at Base 9 ft (2.74 m)
Tub Wall Thickness 12 gage (2.66 mm)
Tub Floor Thickness 1/4 in (6.35 mm)
Drive Mechanism Electro/Hydraulic
Speed control Electronic Governor
Service Access Tub opens to 90 degrees to the right side
BELLY CONVEYOR
Type Rubber Belt with 3/4 in (19.05 mm) cleats
Width 36 in (91.4 cm)
Drive Hydraulic
Drive & Idler Rollers Type “Easy Clean”
STACKING CONVEYOR
Type Rubber Belt with 1-1/2 in (38.1 mm) Cleats
Drive Hydraulic, Top driven
Drive & Idler Roller Type “Easy Clean”
Length 26 ft. (7.92 m)
Width 30 in. (76.2 cm)
Max. Conveyor Discharge Height 18 ft 3 in (5.56 m)
Lift Electric/Hydraulic
Fold Electric/Hydraulic
Oscillation (50°) Electric/Hydraulic
OPERATOR CONTROLS CENTRAL COMMAND CONSOLE
Engine Functions
Battery Disconnect Rotating key, switch with power off, lock, power on
Ignition Rotating key switch with lock, power on, start, run and power off
Throttle 3-position switch to increase rpm, hold rpm, and decrease rpm
Emergency Engine Stop 2-position switch, pull out to run and push in to stop
Tub Grinder Functions
Hammermill 2-position switch, pull out to engage and push in to disengage
2-position safety switch, push and hold until hammermill begins to spin
Conveyor Lift 3-position switch to raise, hold, & lower
Conveyor Oscillation 3-position switch for right, hold, & left
Conveyor Storage 3-position switch to fold, hold or to unfold
Belly & Discharge Conveyor 2-position switch to engage and disengage
Tub Rotation 3-position switch to operate tub clockwise, stop, & counter-clockwise
Tub Speed Model RCB93 electronic governor stabilizes engine load by adjusting tub rotation speed
Tub Tilt 3-position switch to raise, hold, & lower
REAR COMMAND CONSOLE
Conveyor Lift 3-position switch to raise, hold, & lower
Conveyor Oscillation 3-position switch for right, Hold, & left
Conveyor Storage 3-position switch to fold, hold or to unfold
REQUIREMENTS FOR OPERATION TRUCK SPECIFICATIONS
Min. Truck Horsepower 300 HP (223.7 kw)
Min. Rear Axle(s) Capacity 31,100 lbs (14,106.7 kg)
Min. Front Axle Capacity 9,650 lbs (4,377.17 kg)
Recommended Rear Axle Suspension Air ride with dump valve (to lower loading height)
Frame Width 34” +/- 1/2”
Frame Material Steel
Fuel Tanks

Dual tanks are recommended

Minimum of 200 gal for truck and grinder combined use, if off-road fuel
is allowed for truck use in this application.

Minimum of (1) 150 gal and (1) 50 gal tanks if off-road fuel is not for
truck use.

Minimum of (1) 50 gal min if optional 211 gal truck style tank is selected
(see fuel system setup instructions for more information)
Fuel System Setup Methods Method 1 – Tanks should be connected with a minimum of ½ in crossover
fuel line with quarter-turn shutoff valves at each tank. Grinder and truck will
share fuel source. DO NOT tee off of truck supply lines, this will un-prime
the truck fuel system. This setup is recommended only if local laws allow
off-road fuel use in this truck in this application.

Method 2 – Truck and grinder will each use a fuel tank dedicated to their
separate operation. It is recommend that the tanks be connected with a
crossover line with shutoff valve so the truck source tank can be used for a
grinder reserve tank.

Method 3 – Truck is equipped with one tank for the truck engine on driver’s
side. An optional 211-gallon tank will be installed on the passenger side.
Adequate space will be required under truck cab for the tank

MEDIA

more

Contact Us

    You Name*

    Subject*

    Email Addres*

    Message

    Contact the Red Deer Hay Center

    Phone: 403 340 1000
    Hours or Operation
    Monday to Friday: 8:30 PM to 5:00 PM
    Saturday: 8:30 AM to 12: PM
    Sunday: Closed
    eMail : ed@haycenter.com